History of Engine

History of engines

Antiquity

Engines using human power, animal power, water power, wind power and even steam p

Human power was focused by the use of simple engines, such as the capstan, windlass or treadmill, and with ropes, pulleys, and block and tackle arrangements, this power was transmitted and multiplied. These were used in cranes and aboard ships during Ancient Greece, and in mines, water pumps and siege engines in Ancient Rome. Early oared warships used human power augmented by the simple engine of the lever -- the oar itself. The writers of those times, including Vitruvius, Frontinus and Pliny the Elder, treat these engines as commonplace, so their invention may be far more ancient.

By the 1st century AD, various breeds of cattle and horses were used in mills, using machines similar to those powered by humans in earlier times.

According to Strabo, a water powered mill was built in Kaberia in the kingdom of Mithridates in the 1st century BC. Use of water wheels in mills spread through Europe over the next few centuries. Some were quite complex, with aqueducts, dams, and sluices to maintain and channel the water, and systems of gears, or toothed-wheels made of wood with metal, used to regulate the speed of rotation. In a poem by Ausonius in the 4th century, he mentions a stone-cutting saw powered by water.

Hero of Alexandria demonstrated both wind and steam powered machines in the 1st century, although it is not known if these were put to any practical use.

Modern
Four Stroke Engine


English inventor Sir Samuel Morland allegedly used gunpowder to drive water pumps in the 17th century. For more conventional, reciprocating internal combustion engines the fundamental theory for two-stroke engines was established by Sadi Carnot, France, 1824, whilst the American Samuel Morey received a patent on April 1, 1826.

Automotive production has used a range of energy-conversion systems. These include electric, steam, solar, turbine, rotary, and piston-type internal combustion engines. The gasoline internal combustion engine, operating on a four-stroke Otto cycle, has been the most successful for automobiles, while diesel engines are used for trucks and buses. The patent on the design by Otto had been declared void.

Karl Benz led in the development of new engines. In 1878 he began to work on new patents. He concentrated his efforts on creating a reliable gas two-stroke engine, based on Nikolaus Otto's design of the four-stroke engine. Karl Benz showed his real genius, however, through his successive inventions registered while designing what would become the production standard for his two-stroke engine. Benz finished his engine on New Year's Eve and was granted a patent for it in 1879.

In 1896, Karl Benz was granted a patent for his design of the first boxer engine with horizontally-opposed pistons. His design created an engine in which the corresponding pistons reach top dead centre simultaneously, thus balancing each other with respect to momentum. Flat engines with four or fewer cylinders are most commonly boxer engines and are also known as, horizontally-opposed engines. This continues to be the design principle for high performance, automobile racing engines such as Porsches.

Continuance of the use of the internal combustion engine for automobiles is partially due to the improvement of engine control systems (computers) and forced induction (turbos and superchargers), giving modern diesel engines the same power characteristics as gasoline engines. This is especially evident with the popularity of diesel engines in Europe.

The internal combustion engine was originally selected for the automobile due to its flexibility over a wide range of speeds. Also, the power developed for a given weight engine was reasonable; it could be produced by economical mass-production methods; and it used a readily available, moderately priced fuel--gasoline.
Mercedes V6 engine in 1996


In today’s world, there has been a growing emphasis on the pollution producing features of automotive power systems. This has created new interest in alternate power sources and internal-combustion engine refinements that were not economically feasible in prior years. Although a few limited-production battery-powered electric vehicles have appeared, they have not proved to be competitive owing to costs and operating characteristics. In the twenty-first century the diesel engine has been increasing in popularity with automobile owners. However, the gasoline engine, with its new emission-control devices to improve emission performance, has not yet been challenged significantly.

The first half of the twentieth century saw a trend to increase engine power, particularly in the American models. Design changes incorporated all known methods of raising engine capacity, including increasing the pressure in the cylinders to improve efficiency, increasing the size of the engine, and increasing the speed at which power is generated. The higher forces and pressures created by these changes created engine vibration and size problems that led to stiffer, more compact engines with V and opposed cylinder layouts replacing longer straight-line arrangements. In passenger cars, V-8 layouts were adopted for all piston displacements greater than 250 cubic inches (4 litres).

Smaller cars brought about a return a to smaller engines, the four- and six-cylinder designs rated as low as 80 horsepower (60 kW), compared with the standard-size V-8 of large cylinder bore and relatively short piston stroke with power ratings in the range from 250 to 350 hp (190 to 260 kW).

The automobile motor had a bigger range, varying from 1-12 cylinders with corresponding differences in overall size, weight, piston displacement, and cylinder bores. Four cylinders and power ratings from 19 to 120 hp (14 to 90 kW) were followed in a majority of the models. Several three-cylinder, two-stroke-cycle models were built while most engines had straight or in-line cylinders. There were several V-type models and horizontally opposed two- and four-cylinder makes too. Overhead camshafts were frequently employed. The smaller engines were commonly air-cooled and located at the rear of the vehicle; compression ratios were relatively low. The 1970s and '80s saw an increased interest in improved fuel economy which brought in a return to smaller V-6 and four-cylinder layouts, with as many as five valves per cylinder to improve efficiency.