design wif pc 1st...
then print out ur design..
make sure the place & size 1st....
spray mount the design that print out stick on the sticker then cut it out..
after that then stick on the black sticker then cut out, leave 3 or 4 mm around it..
after cut it out then put on the body for double check...
ok, now start 2 stick the sticker on to the car....
1st cut out the door part, make sure the surface is clean, spray on shampoo, then stick on the sticker, after place it on the corect place,
then slowly make out the shampoo, done.....
body also do the same step....
done it...
the other site do the same step.....